Air System Testing that Delivers Confidence

Ensure your product data is reliable and accurate by testing with the only third-party testing body exclusively dedicated to the air systems industry. The Air Movement and Control Association (AMCA) International Accredited Laboratory performs thousands of tests annually, providing confidence in the quality and reliability of your product to manufacturers, purchasers, specifiers, and users.

Real-World Testing Conditions

AMCA laboratories can test more than 20 air system products for various efficiencies, leakage, stability, and sound. We can evaluate your products based on their performance. Replicating real-world conditions such as rain, sand, wind, extreme temperatures, and other environmental factors enables us to test how well your product can withstand category-three hurricanes, desert sandstorms, and other harsh conditions.

Raising the Standard in Testing

Referenced in engineering specifications worldwide, AMCA test standards are accredited by the American National Standards Institute (ANSI), with most methods harmonized with the International Organization for Standardization (ISO).

The type of product and performance of interest dictates which AMCA/ANSI Test Standard and AMCA Rating Program Document is applied. Sometimes, two products tested in the same way can be rated differently.

AMCA standards are essential peer-vetted resources that are continually revised to accommodate changing codes and regulations, ensuring that your product testing will always reflect current best practices.

Equipment

The AMCA International laboratory includes:

Four reverberation rooms ranging in size from 6,300 cu ft (178 m³) to 65,500 cu ft (1,855 m³), where inlet, outlet, and total sound power are measured.
Two water-test chambers in which up to 8-in.- (20 cm) per-hour rainfall and 50-mph (22.4 m/s) wind can be simulated for tests of the water-rejection capabilities of louvers.
Three multi-nozzle chambers capable of measuring up to 88,000-cfm (41.53 m³/s) airflow.
A thrust-measurement rig able to accommodate circulating fan heads up to 72 in. (183 cm) in diameter.
Adjacent reverberant rooms used for testing acoustical louvers in accordance with ASTM E90, Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements.
A rig for testing ceiling fans up to 18 ft (5.5 m) in diameter. Larger fans up to 24 ft (7.3 m) in diameter are tested off site.
A rig for testing jet fans up to 55 in. (140 cm) in diameter.

Partner Laboratories

CETIAT, France | Phone: +33 (0)4 72 44 49 00 | Fax: +33 (0)4 72 44 49 49

KTC, Korea | Phone: +82-31-428-8407 | Fax: +82-31-624-5837

Thomas Bell-Wright, United Arab Emirates | Phone: +971 04 821 5777

Third-Party Laboratories

Intertek, USA, NY l Phone: 607-758-6250 | Cell: 607-423-3803

PRI Construction Materials Technologies LLC, USA, FL

Phone: 813-621-5777 | Fax: 813-621-5840

Riverbank Acoustical Laboratories USA, IL l Phone: 630-232-0104

Types of Tests

Acoustic duct silencers

Acoustic Performance

Aerodynamic Performance

Air Circulating Fan

Air Curtains Uniformity & Projection

Air Flow

Airflow Measurement Station

Air Performance

Induced Flow

Jet Fan

Leakage

Loudness Rating

Louver Impact

Positive Pressure Ventilators

Pressure Drop

Sound Performance

Water Penetration

Wind Driven Rain

Wind Driven Sand

Testing vs Certified

Participating in the AMCA Certified Ratings Program (CRP) is distinct from testing a product following AMCA standards or testing in an AMCA-accredited laboratory. To be AMCA Certified, the product data must undergo a complete process that includes application, testing, review, certification, and verification. This process ensures that the product has met the industry's highest standards and is the most trusted and recognized certification. AMCA CRP provides accountability for published data, leading to efficient air systems in buildings worldwide.

AMCA Laboratory Headquarters, USA

30 West University Drive, Arlington Heights, IL 60004, USA

Phone: +1 (847) 394-0150 | Fax: +1 (847) 253-0088 l Email: [email protected]

Testing capacities

AMCA Laboratory, Malaysia

Asia AMCA Sdn Bhd, No. 7, Jalan SiLC 1/6, Kawasan, Perindustrian SiLC Nusajaya, Mukim Jelutong, 79200 Nusajaya, Johor, Malaysia

Phone: +65 3157 6307 | Email: [email protected]

Tan Tin Tin, Technical Director

Testing capacities

AMCA is accredited through the American Association for Laboratory of Accreditation (A2LA) in accordance with ISO/IEC 17025 and 17065 testing and calibration. Learn more about our accreditation scope and certificates 2477-01 and 2477.02.

AMCA Labs - Arlington Heights, Illinois, USA

AMCA Labs - Asia AMCA Malaysia

Partner Labs - CETIAT - Lyons France

Partner Labs - Thomas Bell-Wright- Dubai UAE

Partner Labs - KTC - Korea Testing Certification

AMCA Accredited Laboratories

Become Lab Accredited

Testing Resources

Testing Facility Capabilities

AMCA is accredited through the American Association for Laboratory of Accreditation (A2LA) for complying with ISO/IEC 17025 for testing and calibration and ISO/IEC 17065 for providing certification to other companies. Learn more about our ISO/IEC 17065 accreditation certification, product types, and standards.

Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating

ANSI/AMCA Standard 210-16	Small Chamber	Large Chamber
Figure 12 Max Outlet Area - Perpendicular Rotation	2.64 ft² (0.25 m²)	21.04 ft² (1.95 m²)
Figure 12 Max Outlet Area - Parallel Rotation (Vane Axial Fans Only)	1.5 ft² (0.14 m²)	11.84 ft² (1.10 m²)
Figure 12 Max Outlet Area - Parallel Rotation	0.95 ft² (0.09 m²)	7.58 ft² (0.70 m²)
Figure 15 Max Inlet Area - Any Rotation	4.75 ft² (0.44 m²)	37.52 ft² (3.49 m²)
Max Airflow at 0 Pa (in. wg)	11,500 cfm (5.43 m³/s)	68,000 cfm (32.09 m³/s) - Fig 12 88,000 cfm (41.53 m³/s) - Fig 15
Max Static Pressure	44 in wg. (10,960 Pa)	22 in wg. (5,480 Pa)
Max Brake Horsepower	40 HP (29.8 kW) @ 3500 RPM	40 HP (29.8 kW) @ 3500 RPM 75 HP (55.9 kW) @ 1800 RPM
Min/Max Torque	10 lb-in / 1600 lb-in (1.13 N-m / 180.8 N-m)	10 lb-in / 3000 lb-in (1.13 N-m / 339 N-m)
Max Dynamometer Speed	3500 RPM	1800 RPM (75 HP) 3500 RPM (All Others)
Electric Motor (60 Hz)	56 Amps, 480 Volts	56 Amps, 480 Volts
Electric Motor (50 Hz)	52 Amps, 420 Volts	52 Amps, 420 Volts

Reverberant Room Method for Sound Testing of Fans

ANSI/AMCA Standard 300

Reverb Room 1

Reverb Room 2

Reverb Room 4

Max Volume of Test Unit

with Ductwork

604 ft³ (17.1 m³)

365 ft³ (10.3 m³)

63 ft³ (1.8 m³)

Frequency	63	125	250	500	1000	2000	4000	8000	LwA
Approx Min Fan Lw Reverb Room 1 (dB)	62	56	59	43	35	35	37	44	53
Approx Min Fan Lw Reverb Room 2 (dB)	58	45	35	36	27	26	32	38	41
Approx Min Fan Lw Reverb Room 4 (dB)	33	38	29	20	18	20	23	28	31

Motor Calibration

Lower Limit

Upper Limit

Motor input at 50hz or 60hz, with

or without controller

0.5 HP (0.37 kW) @ 3500rpm

40 HP (29.8 kW) @ 3500 RPM

75 HP (55.9 kW) @ 1800 RPM

Laboratory Methods of Testing Dampers for Rating

ANSI/AMCA Standard 500-D	Small Chamber	Large Chamber
Duct Sizes Round	12 in (305 mm)	24 in (610 mm), 36 in (914 mm)
Duct Sizes Rectangle	12 x 12 in (305 x 305 mm)	24 x 24 in (610 x 610 mm) 36 x 36 in (914 x 914 mm) 12 x 48 in (610 x 1219 mm)
Figure 5.1, 5.2, 5.3 Max Free Area	1 ft² (.09 m²)	9 ft² (.84 m²)
Figure 5.4 Max Free Area	1.58 ft² (.15 m²)	12.63 ft² (1.17 m²)
Figure 5.5 Max Free Area	7.92 ft² (.74 m²)	62.56 ft² (5.81 m²)

ANSI/AMCA Standard 610-19 | Laboratory Methods of Testing Airflow Measurement Stations for Performance Rating

ANSI/AMCA Standard 610	Small Chamber	Large Chamber
Duct Sizes Round	12 in (305 mm)	24 in (610 mm), 36 in (914 mm)
Duct Sizes Rectangle	12 x 12 in (305 x 305 mm)	24 x 24 in (610 x 610 mm) 36 x 36 in (914 x 914 mm) 12 x 48 in (610 x 1219 mm)
Figure 1, 2, 3 Max Free Area	1 ft² (.09 m²)	9 ft² (.84 m²)
Figure 4 Max Free Area	1.58 ft² (.15 m²)	12.63 ft² (1.17 m²)
Figure 5 Max Free Area	7.92 ft² (.74 m²)	62.56 ft² (5.81 m²)

Testing Facility Capabilities

Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating

ANSI/AMCA Standard 210	Small Chamber	Large Chamber
Figure 12 Max Outlet Area - Perpendicular Rotation	0.252 m² (2.715 ft²)	2.20 m² (23.67 ft²)
Figure 12 Max Outlet Area - Parallel Rotation (Vane Axial Fans Only)	0.142 m² (1.527 ft²)	1.24 m² (13.34 ft²)
Figure 12 Max Outlet Area - Parallel Rotation	0.091 m² (0.977 ft²)	0.794 m² (8.54 ft²)
Figure 15 Max Inlet Area - Any Rotation	0.454 m² (4.886 ft²)	4.89 m² (52.62 ft²)
Max Airflow at 0 in. wg	4.54 m³/s (9,620 cfm)	39.5 m³/s (83,500 cfm) - Fig 12 48.1 m3/s (102,000 cfm) - Fig 15
Max Static Pressure	2500 Pa (10 in wg.)	8000 Pa (32 in wg.)
Max Brake Horsepower	11kW (15HP) @ 2900 RPM 37 kW (50HP) @ 1500 RPM	11kW (15HP) @ 2900 RPM 37 kW (50HP) @ 1500 RPM
Max Dynamometer Speed	1500 RPM @ 37kW (50HP) 2900 RPM @ All others	1500 RPM @ 37kW (50HP) 2900 RPM @ All others
Electric Motor (50 Hz)	65 Amps, 440 Volts	65 Amps, 440 Volts

Reverberant Room Method for Sound Testing of Fans

ANSI/AMCA Standard 300

Reverb Room

Max Volume of Test Unit with

Ductwork

14.4 m³ (509 ft³)

Frequency	63	125	250	500	1000	2000	4000	8000	LwA
Approx Min Fan Lw Reverb Room (dB)	66	53	47	41	34	27	32	33	46

ANSI/AMCA Standard 500-D-18 | Laboratory Methods of Testing Dampers for Rating

ANSI/AMCA Standard 500-D	Small Chamber	Large Chamber
Duct Sizes Round (mm)	305, 610	914
Duct Sizes Rectangle (mm)	305x305, 610x610	914x914, 305x1220
Figure 5.3 Max Free Area	0.372 m² (4 ft²)	0.837 m² (9 ft²)
Figure 5.4 Max Free Area	0.151 m² (1.63 ft²)	1.323 m² (14.23 ft²)
Figure 5.5 Max Free Area	0.757 m² (8.14 ft²)	8.15 m² (87.70 ft²)

Laboratory testing facility capabilities of the AMCA Partner Lab—CETIAT in Lyons, France

ISO5801	Reverb 1
Max Outlet Area - Perpendicular Rotation	1.333 m² (14.348 ft²)
Max Outlet Area - Parallel Rotation	0.750 m² (8.073 ft²)
Max Inlet Area	NA
Max Airflow at 0 in. wg	13.9 m³/s (29,426 cfm)
Max Static Pressure	2500 Pa (10.04 in. wg)
Max Brake Horsepower	37 kW (50HP) @ 3500 RPM
Max Dynamometer Speed	3500 RPM @ 37 kW (50HP)

ISO 13347	Reverb 1
Max volume of Test Unit Duct Work	5.5 m³ (194.2ft3)

Frequency	63	125	250	500	1000	2000	4000	8000	LwA
Approx Min Fan Lw Reverb Room 1 (dB)	62	56	49	52	44	41	34	29	52

Laboratory testing facility capabilities of the AMCA Partner Lab—Thomas Bell-Wright in Dubai, UAE.

AMCA 500-L	Chamber
Max Free Area - Pressure Drop	0.94 m² (10.12 ft²)

Laboratory testing facility capabilities of the AMCA Partner Lab—KTC - Korea Testing Certification

AMCA 210	Small Chamber _(MPIR1240)	Large Chamber _(MPIR1260)	Large Chamber _(MPIR1560)
Figure 12 Max Outlet Area - Perpendicular Rotation	1.368 m² (14.72 ft²)	4 m² (43.04 ft²)	NA
Figure 12 Max Outlet Area - Parallel Rotation (Vane Axial Fans Only)	0.77 m² (8.29 ft²)	2.25 m² (24.21 ft²)	NA
Figure 12 Max Outlet Area - Parallel Rotation	0.493 m² (5.31 ft²)	1.44 m² (15.49 ft²)	NA
Figure 15 Max Inlet Area - Any Rotation	NA		7.2 m² (77.47 ft²)
Max Airflow at 0 in. wg	24.3 m³/s (51,383 cfm)	71.81 m³/s (151,855 cfm)
Max Static Pressure	2936.5 Pa (11.8 in wg)	6852.9 Pa (27.6 in wg)
Max Brake Horsepower	22 kW @ 3540 149 kW @ 1750
Max Dynamometer Speed	3540 RPM (22kW) 1750 RPM (All Others)

AMCA 300
Max volume of Test Unit with Duct Work	38.08 m³ (1344.8 ft3)

Frequency	63	125	250	500	1000	2000	4000	8000	LwA
Approx Min Fan Lw Reverb Room (dB)	77	59	50	44	36	32	38	46	54

The manufacturers listed below are currently licensed under the AMCA Laboratory Accreditation Program. Laboratory accreditation involves rigorous audits of test equipment and laboratory procedures to ensure the integrity and competence of the laboratory. Visit AMCA Become Lab Accredited for details.

Use our product and listing label search for the appropriate air system components that fulfill required performance specifications.

Laboratory Accreditation vs Certified Ratings Program

The laboratory accreditation program does not replace the AMCA Certified Ratings Program (CRP) for products and is separate from the AMCA Laboratory Accreditation Program. Product performance data based on tests conducted in an AMCA Accredited Laboratory should not be considered as being authorized to display the AMCA CRP Seal or Labels. However, laboratory accreditation is not required for a manufacturer to obtain AMCA Certified Ratings for products.

Accredited labs by region

All Regions
Asia
Europe
Mexico
Middle East
North America
South America

Elevate the integrity and competence of your laboratory by becoming an Air Movement and Control Association (AMCA), International accredited laboratory.

Accredited Laboratory Program

The AMCA International Laboratory Accreditation Program uses testing methods recognized by AMCA Publication 111 and conducts strict audits of test equipment and laboratory procedures to ensure reliability and competence.

The average path to laboratory accreditation takes nine months and requires significant resources and time. Before considering laboratory accreditation, purchase and review the AMCA Publication 111-13 I Laboratory Accreditation Program.

Accreditation remains valid for three years, during which the quality of equipment and testing procedures must be maintained to ensure continued compliance.

Review more than 60 AMCA Accredited Laboratories.

Eligibility

Manufacturing companies that regularly design, fabricate, assemble, and sell products within the scope of AMCA air systems can participate in the program as either a member or affiliate. AMCA is a not-for-profit organization that offers knowledge, expertise, and certification resources exclusively to its members and affiliates through an application process.

Member or Affiliate Application

Determine if your company would like to apply as an AMCA member or affiliate.

Manufacturers from all over the world join AMCA as a member to take advantage of the effectiveness of industry associations. This includes gaining access to valuable market intelligence and the ability to help shape codes, standards, and regulations.

Companies that prefer to focus on testing choose the affiliate path to laboratory accreditation. Review AMCA member benefits.

Phase One: Application

Step	Phase One Application	Business Days
1. Submit	Manufactuing company submits the complete and accurate member or affiliate application package. complete and accurate 9-page application attached copy of the application fee transaction attached brochures, catalogs, or product specification sheet(s)	Day 1
2. Verify	AMCA reviews and verifies documentation.	Day 10
3. Financial Evaluation	AMCA conducts a financial risk evaluation.	Day 10
4. Site visit	AMCA schedules and conducts and informal site visit of the manufacturing facility.	Day 55
5. Vote	AMCA Board of Directors formal vote.	Day 75
6. Approval	AMCA notification of board vote. If approved, an invoice will be issued.	Day 95
7. Payment	Receive access to AMCA resources with paid invoice and certification enrollment information.	Day 125

Phase Two: Laboratory Accreditation Enrollment

Step	Description	Timeframe
8.	Submit the complete application package by attaching the following via email to [email protected], [email protected] and [email protected] , subject: AMCA Lab Accreditation a complete application for Accreditation of Laboratory a compiled documentation on the laboratory the application fee	Day 1
9.	AMCA reviews and verifies documentation.	Day 10
10.	After the application is approved, AMCA technical staff will select a suitable product(s) for testing and arrange a mutually convenient date for the witness test. AMCA will issue an invoice for the site visit and make travel plans upon payment.	Day 14
11.	The applicant’s laboratory will perform the witness test, if necessary, a second witness test will be performed.	Day 60
12.	Applicant will ship the witness test product to AMCA for a check test.	Day 70
13.	AMCA will perform the check test and after completion, issue an invoice for the check test.	Day 90
14.	Upon payment, AMCA will release the test results If necessary, indicate if any changes are required to comply with the program Send a copy of the Laboratory Accreditation License Agreement for electronic signature Issue the first annual license fee invoice	Day 120
15.	Upon payment, AMCA will include the applicant to the list of Accredited Laboratory, issue the Laboratory Accreditation Plaque, and submit an AMCA signed Laboratory Accreditation License Agreement.	Day 150

AMCA Product Scope

Air Control & Movement	Fans	Ventilators
Acoustical duct silencer	Agricultural	Energy-recovery
Air-curtain unit	Arrays	Heat-recovery
Airflow-measurement station	Axial	Positive pressure
Axial impeller	Centrifugal	Power roof
Damper	Circulating	Residential ceiling
Duct	Induced flow
Evaporative cooler	Jet
Louver	Large-diameter ceiling
Single room air-handler	Mixed flow
Spiral gravity roof ventilator	Propeller

Accredited vs Certified

It is important to understand that the AMCA Laboratory Accreditation Program and the AMCA Certified Ratings Program (CRP) are two separate entities. Manufacturers should not consider product performance data, which is based on tests conducted in an accredited laboratory, as authorization to use the AMCA Seal. It's worth noting that obtaining laboratory accreditation is not mandatory for manufacturers to obtain AMCA CRP for their products.

Application Tips

Your company can expedite your time by adhering to these tips:

Phase One: Member or Affiliate Application

Application package submission attachments:
1. complete an accurate 9-page application
2. brochures, catalogs, or product specification sheet(s)
3. copy of the application fee transaction
Have your AMCA product scope offerings on your website with an image and brief description.
Prepare to have an informal site visit within 55 days of applicant submission.
Pay all invoices upon receipt.

Phase Two: Laboratory Accreditation Enrollment

Application package submission attachments:
1. complete application for Accreditation of Laboratory
2. compiled documentation on the laboratory
3. copy of the application fee transaction
Send products to test on time or ahead of the due date.
Pay all invoices upon receipt.

AMCA Laboratory Headquarters, USA

30 West University Drive, Arlington Heights, IL 60004

Phone: +1 (847) 394-0150 | Fax: +1 (847) 253-0088

Questions? Complete and follow the instructions of the Laboratory Accreditation Program inquiry form. Only complete forms accompanying the fee will be processed.

Testing Resources

The following resources will provide the necessary information to prepare to test your product for research and development purposes. Please download and review these appropriate documents in advance of contacting AMCA International.

ANSI/AMCA Standard

Download and review the appropriate test standard.

Testing Meeting

After you have reviewed the appropriate documentation, you’re ready to submit your testing inquiry form. This form will provide our testing team with the details they need to provide details regarding testing, processes, documentation, and costs.

testing inquiry form

Certification Testing

Please visit the Certified Ratings Program page to access the necessary details regarding the certification program, streamline the process, expedite the timeline, and provide the necessary information to prepare for certification.

Non-Member Testing Timeframe

Step	Process	Business Days
Submit	Submit the inquiry form with fee.	Day 1
Enrollment	AMCA Supplies Testing Agreement Form (TAF)	Day 14
Test plan	Submit Testing Agreement Form (TAF) with applied AMCA/ANZI test standard(s)	Day 20
Agreement	AMCA approves TAF applying the appropriate test standard(s).	Day 40
Product received	AMCA receives product to be tested	Day 65
Testing	Paid invoice, begins testing	Day 90
Review	Receive test reports with paid invoice	Day 180

Air Movement and Control Association International, Inc.

Air System Testing that Delivers Confidence

Real-World Testing Conditions

Raising the Standard in Testing

Equipment

Partner Laboratories

Third-Party Laboratories

Types of Tests

Testing vs Certified

AMCA Laboratory Headquarters, USA

AMCA Laboratory, Malaysia

Testing Facility Capabilities

Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating

Reverberant Room Method for Sound Testing of Fans

Laboratory Methods of Testing Dampers for Rating

ANSI/AMCA Standard 610-19 | Laboratory Methods of Testing Airflow Measurement Stations for Performance Rating

Testing Facility Capabilities

Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating

Reverberant Room Method for Sound Testing of Fans

ANSI/AMCA Standard 500-D-18 | Laboratory Methods of Testing Dampers for Rating

Laboratory Accreditation vs Certified Ratings Program

Accredited labs by region

Laboratories

AAON Incorporated

AAON Incorporated

Laboratory Located At

Is Accredited by AMCA International for Testing According To

Acme Engineering and Manufacturing Corporation

Acme Engineering and Manufacturing Corporation

Laboratory Located At

Is Accredited by AMCA International for Testing According To

American Coolair Corporation

American Coolair Corporation

Laboratory Located At

Is Accredited by AMCA International for Testing According To

Big Ass Fans

Big Ass Fans

Laboratory Located At

Is Accredited by AMCA International for Testing According To

CETIAT

CETIAT

Laboratory Located At

Is Accredited by AMCA International for Testing According To

Chicago Blower Corporation

Chicago Blower Corporation

Laboratory Located At

Is Accredited by AMCA International for Testing According To

Comefri S.p.A.

Comefri S.p.A.

Laboratory Located At

Is Accredited by AMCA International for Testing According To

Comefri USA Inc.

Comefri USA Inc.

Laboratory Located At

Is Accredited by AMCA International for Testing According To

Construction Specialties, Inc.

Construction Specialties, Inc.

Laboratory Located At

Is Accredited by AMCA International for Testing According To

DongGuan Wolter Chemco Ventilation Ltd

DongGuan Wolter Chemco Ventilation Ltd

Laboratory Located At

Is Accredited by AMCA International for Testing According To

ebm-papst Inc.

ebm-papst Inc.

Laboratory Located At

Is Accredited by AMCA International for Testing According To

ebm-papst Mulfingen GmbH & Co. KG

ebm-papst Mulfingen GmbH & Co. KG

Laboratory Located At

Is Accredited by AMCA International for Testing According To

Elektrovent SRL

Elektrovent SRL

Laboratory Located At

Is Accredited by AMCA International for Testing According To

Elta UK Ltd.

Elta UK Ltd.

Laboratory Located At

Is Accredited by AMCA International for Testing According To

Flakt Woods, Ltd.

Flakt Woods, Ltd.